Other paraffin products

Other paraffin products are used in various industries. 

Protective wax JAW-1 (briquettes)

 No.  Indicator Standard Specification
1 Colour, Saybolt ASTM D156 ASTM D1500 -10.0 2.0
2 Melting temperature, °C, min. 55.0
3 Density at 20°C, g/cm3, min. 0.810
4 Kinematic viscosity, mm2/s 4.5 – 7.5
5 Refractive index at 70°C, max. 1.4600
6 Water mass content, % Traces
7 Mechanical impurities content, %, max. 0.006

Ceresin (briquettes)

 No.  Indicator Standard Specification
1 Colour, Saybolt ASTM D156 ASTM D1500 -16.0 4.8
2 Melting temperature, °C, min. 75.0 – 80.0
3 Penetration at 25°C, 0.1 mm, max. 18
4 Mechanical impurities content, %, max. 0.02
5 Water mass content, % None
6 Ash mass content, %, max. 0.02
7 Acid number, Mg KOH/1 g, max. 0.06
8 Water-soluble acids andalkalis content, % None

Paraffin softener JAPP (briquettes)

 No.  Indicator Specification
1 Appearance The crystalline mass. Tints from light brown to dark brown are permissible
2 Pour point, °C, min. 60.0
3 Acid number, Mg KOH/1 g, max. 0.05
4 Sulfur mass fraction, %, max. 0.3
5 Water-soluble acids andalkalis content, % None
    6 Water mass content, % Traces
7 Mechanical impurities content, %, max. 0.1

Petrolatum-1 (briquettes)

 No.  Indicator Specification
1 Colour, Saybolt Light brown
2 Pour point, °C, min. 60.0
3 Kinematic viscosity at 70°C, mm2/s, min. 12.00
4 Oil lubricant content, % 4.5 – 7.5
5 Melting temperature, °C, min. 65.0
6 Water mass content, %, max. 0.2
7 Sulfur mass fraction, %, max. 0.25
8 Mechanical impurities content, %, max. 0.05
9 Flashpoint, °C, min. 200

Petrolatum-2 (briquettes, liquid)

 No.  Indicator Specification
1 Colour, Saybolt Light brown
2 Pour point, °C, min. 58.0
3 Acid number, Mg KOH/1 g, max. 0.1
4 Water-soluble acids andalkalis content, % None
5 Water mass content, %, max. 1.0
6 Sulfur mass fraction, %, max. 1.0
7 Mechanical impurities content, %, max. 0.05
8 Phenol content None
9 Flashpoint, °C, min. 220
10 Penetration, 0.1 mm, max. 70